top of page

Group

Public·39 members
Andrew Stewart
Andrew Stewart

Polyphaser IS 50nx C2 Pdf Free: Everything You Need to Know About This Coaxial RF Surge Protector



Polyphaser IS 50nx C2 Pdf Free: A Comprehensive Guide




If you are looking for a reliable and effective way to protect your radio equipment from lightning surges, you might want to consider the Polyphaser IS 50nx C2. This is a coaxial RF surge protector that can handle a wide range of frequencies and power levels. In this article, we will explain what this device is, what features and specifications it has, how to download its PDF manual for free, how to install and use it, and answer some frequently asked questions. By the end of this article, you will have a clear understanding of why the Polyphaser IS 50nx C2 is a great choice for your radio protection needs.




Polyphaser Is 50nx C2 Pdf Free



What is Polyphaser IS 50nx C2?




Polyphaser IS 50nx C2 is a type of coaxial RF surge protector, also known as a lightning arrester or a surge arrestor. It is a device that protects your radio equipment from damage caused by voltage spikes or surges that may occur due to lightning strikes or other sources of electromagnetic interference. It does this by diverting the excess energy to the ground or by blocking it from reaching your equipment.


A coaxial RF surge protector




A coaxial RF surge protector is a device that is designed to protect coaxial cables and connectors that carry radio frequency (RF) signals. Coaxial cables are commonly used for transmitting and receiving signals in various radio applications, such as ham radios, HF, UHF, and VHF radios, remote industrial monitoring, SCADA, public safety communications, and more. Coaxial cables are vulnerable to lightning surges because they act as antennas that can pick up electromagnetic energy from nearby lightning strikes or other sources. This energy can travel along the cable and damage the equipment connected to it.


A coaxial RF surge protector is installed between the coaxial cable and the equipment, usually at both ends of the cable. It has two connectors that match the type and impedance of the cable, such as N-type, F-type, or UHF connectors. It also has a component that acts as a switch or a valve that regulates the flow of RF signals and surges. This component can be a gas tube (GT or GDT), a blocking capacitor, a quarter-wave stub, a spark gap, or a combination of these. Depending on the type of component used, the coaxial RF surge protector can either block DC currents (DC block) or pass them through (DC pass).


Features and specifications




Polyphaser IS 50nx C2 is a coaxial RF surge protector that integrates a blocking capacitor with a gas tube. It has N-type female connectors on both ends and can be mounted on a flange or a hole. It has a frequency range from 125 MHz to 1000 MHz and an impedance of 50 ohms. It can handle a maximum power of 375 watts and a surge current of 50 kA. It has a very low insertion loss of less than 0.1 dB and a very low VSWR of less than 1.1:1. It also has a very low throughput energy of less than 220 uJ, which means that it does not affect the quality or strength of the RF signals passing through it.


Some of the features and specifications of Polyphaser IS 50nx C2 are:



Feature


Specification


Surge protector type


Blocking capacitor and gas tube


DC handling


DC block


Frequency range


125 MHz to 1000 MHz


Impedance


50 ohms


VSWR


Insertion loss


Input power, CW


375 watts


Surge current


50 kA


Throughput energy


Turn on voltage


600 volts (+/- 20%)


Connector type


N-type female to N-type female


Mounting type


Flange or hole mount, bracket up


Applications and benefits




Polyphaser IS 50nx C2 is a coaxial RF surge protector that can be used for various radio applications that require protection from lightning surges. Some of the applications are:



  • HF, UHF, and VHF radios: These are radios that operate on high, ultra-high, and very high frequencies, respectively. They are used for communication, broadcasting, navigation, and other purposes. They can be affected by lightning surges that can damage the transmitters, receivers, antennas, and other components.



  • Ham radios: These are radios that are used by amateur radio operators for hobby, education, experimentation, emergency communication, and other purposes. They can operate on various frequency bands and modes, such as voice, data, image, and Morse code. They can also be affected by lightning surges that can cause interference, distortion, or damage.



  • Remote industrial monitoring: This is a process of collecting and transmitting data from remote locations using sensors, meters, cameras, and other devices. It is used for monitoring various parameters, such as temperature, pressure, flow, level, vibration, and more. It can also be affected by lightning surges that can corrupt the data or damage the devices.



  • SCADA: This stands for supervisory control and data acquisition. It is a system that controls and monitors industrial processes using computers, networks, software, and hardware. It is used for managing various operations, such as power generation, water treatment, oil and gas production, and more. It can also be affected by lightning surges that can disrupt the control or damage the equipment.



  • Public safety communications: These are communications that are used by emergency responders, such as police, fire, ambulance, and other agencies. They use radios to coordinate their actions and provide assistance to the public. They can also be affected by lightning surges that can impair their communication or endanger their lives.



Polyphaser IS 50nx C2 is a coaxial RF surge protector that can provide many benefits for these applications. Some of the benefits are:



  • It protects the radio equipment from damage caused by lightning surges or other sources of electromagnetic interference.



  • It preserves the quality and strength of the RF signals passing through it without affecting their performance or functionality.



  • It has a wide frequency range that covers most of the radio applications in use.



  • It has a high power rating that can handle high-power transmissions or receptions.



  • It has a high surge rating that can withstand multiple strikes or surges without degrading or failing.



  • It has a low turn on voltage that ensures fast response and protection.



It has a simple and compact design that makes it easy to install and 71b2f0854b


About

Welcome to the group! You can connect with other members, ge...
bottom of page